Catalogue
Eight divisions. One supplier.
Reagents, instruments, consumables and services across the whole life-science bench — organised by the workflow you are actually running, not by the shelf they sit on.
Full catalogue
Search every line item
Representative products from all eight divisions, in one place. Search by product code, name or application — or filter to a division and browse.
48 of 48 line items
GenElute Genomic DNA Isolation Kit
Silica-membrane spin column chemistry for high-molecular-weight genomic DNA from blood, tissue, and cultured cells. Yields DNA suitable for direct downstream PCR, restriction digestion, and library preparation.
HotStart 2X PCR Master Mix
Antibody-mediated hot-start Taq in a 2X mix with dNTPs, MgCl₂, and an inert loading dye. Suppresses primer-dimer and non-specific priming during setup at room temperature.
qMAX SYBR Green qPCR Master Mix
Optimised for low-copy targets with a wide dynamic range and tight replicate spacing. Passive ROX reference is supplied separately so the mix runs on any instrument chemistry.
Ready-to-Load 1 kb DNA Ladder
Fourteen discrete fragments from 250 bp to 10 kb with reference bands of increased intensity at 1 kb and 3 kb. Supplied in loading buffer — pipette directly onto the gel.
TransFect-HD Transfection Reagent
Cationic lipid formulation delivering high transfection efficiency in adherent and suspension lines with low cytotoxicity. Serum-free medium change is not required.
Custom DNA Oligonucleotide Synthesis
Desalted to HPLC-purified oligos synthesised to order, with modification options including 5′ phosphate, biotin, amino linkers, and dual-labelled probes.
DMEM, High Glucose, with L-Glutamine
Dulbecco's Modified Eagle Medium with 4.5 g/L glucose and sodium pyruvate. Filter-sterilised through a 0.1 µm membrane and released against sterility and endotoxin specifications.
Foetal Bovine Serum, Origin-Certified
Triple 0.1 µm filtered, gamma-irradiated FBS with full traceability documentation. Available in US, South American, and New Zealand origin with lot reservation on request.
Trypsin-EDTA Solution, 0.25 %
Porcine-origin trypsin with EDTA in balanced salt solution, supplied with phenol red so dissociation progress is visible at the bench.
CryoGuard Serum-Free Freezing Medium
Ready-to-use DMSO-based cryopreservation medium that supports high post-thaw viability without the batch variability of serum-containing formulations.
Mueller-Hinton Agar, Dehydrated
Dehydrated medium for antimicrobial susceptibility testing by disc diffusion, manufactured to CLSI cation-content specifications and lot-tested for zone-diameter performance.
TC-Treated Culture Flasks, Vented Cap
Virgin polystyrene flasks with a plasma-treated growth surface for consistent adherent-cell attachment. Vented caps carry a 0.22 µm hydrophobic membrane.
RIPA Lysis & Extraction Buffer
Balanced ionic and non-ionic detergent buffer that solubilises cytoplasmic, membrane, and nuclear proteins in a single step while preserving immunoreactivity for downstream blotting.
BCA Protein Assay Kit
Colorimetric detection of total protein with high detergent tolerance and a broad working range. Includes BSA standards for a full standard curve.
ClarityECL Chemiluminescent Substrate
Enhanced luminol substrate for HRP-conjugated antibodies, delivering picogram sensitivity with a signal plateau long enough for multi-exposure imaging.
Prestained Protein Ladder, 10–250 kDa
Ten recombinant proteins covalently coupled to a chromophore, giving sharp bands for both molecular-weight sizing and visual confirmation of transfer efficiency.
Human IL-6 Sandwich ELISA Kit
Pre-coated 96-well strip plate with matched antibody pair, recombinant standard, and TMB substrate. Validated in serum, plasma, and cell culture supernatant.
Ni-NTA Agarose Affinity Resin
High-capacity nickel-charged agarose for purification of His-tagged recombinant proteins under native or denaturing conditions. Regenerable across multiple cycles.
Class II A2 Biosafety Cabinet
Personnel, product, and environmental protection for BSL-1 to BSL-3 work. Motorised sash with audible alarm on unsafe height and a microprocessor airflow controller that compensates as the HEPA filter loads.
Refrigerated Benchtop Centrifuge
Brushless induction drive with interchangeable swing-out and fixed-angle rotors. Auto-rotor recognition caps the speed to the fitted rotor, and pre-cooling holds the chamber at setpoint before the run.
Gradient Thermal Cycler, 96-Well
Peltier block with a 12-column thermal gradient for single-run annealing optimisation. Heated lid prevents condensation without requiring an oil overlay.
Ultra-Low Temperature Freezer, −86 °C
Cascade refrigeration with vacuum-insulated panels for a compact footprint. Continuous temperature logging and a remote alarm contact protect irreplaceable sample collections.
Double-Beam UV-Vis Spectrophotometer
Reference-corrected double-beam optics for stable absorbance over long kinetic runs. Onboard methods cover nucleic acid quantitation, protein assays, and enzyme kinetics.
Type I Water Purification System
RO pretreatment feeding an ion-exchange and UV polishing loop, delivering 18.2 MΩ·cm ultrapure water at the point of dispense with inline resistivity and TOC monitoring.
AG-C18 HPLC Column, 5 µm
Fully end-capped octadecylsilane on high-purity silica, giving symmetric peaks for basic analytes without mobile-phase additives. Each column ships with its own test chromatogram.
UHPLC C18 Column, 1.8 µm
Sub-2 µm particles for high-throughput separations at elevated backpressure — resolves in a fraction of the run time of a conventional 5 µm method.
Acetonitrile, HPLC Gradient Grade
Low-UV-cutoff acetonitrile filtered to 0.2 µm, specified for gradient elution where baseline drift at low wavelengths would otherwise obscure early-eluting peaks.
Syringe Filters, PTFE 0.22 µm
Hydrophobic PTFE membrane in a polypropylene housing for filtering aggressive organic solvents prior to injection. Low extractables keep the baseline clean.
Certified Reference Material Set
Gravimetrically prepared standards with an accredited certificate stating value, expanded uncertainty, and traceability chain — accepted in regulated method validation.
Rotary Evaporator with Chiller
Motorised lift with a vertical condenser and vacuum controller, allowing gentle solvent removal at reduced pressure without bumping. Supplied as a package with a recirculating chiller.
Filtered Low-Retention Pipette Tips
Hydrophobic self-sealing filter blocks aerosol carry-over between samples, while the low-retention surface leaves negligible residual volume — critical for expensive enzymes and trace targets.
Microcentrifuge Tubes, 1.5 mL
Virgin polypropylene with a moulded hinge rated for repeated opening and a frosted writing panel. Certified to withstand 20,000 × g without deformation.
96-Well qPCR Plate, Semi-Skirted
Thin-wall wells for efficient heat transfer, moulded in ultra-clear polypropylene with low autofluorescence so probe signal is not compromised at low copy number.
Borosilicate 3.3 Media Bottles
GL45 screw-neck bottles in borosilicate 3.3 glass with a pouring ring and autoclavable blue cap — the workhorse vessel for media, buffers, and solvent storage.
Bottle-Top Vacuum Filter Units
Pre-assembled sterile PES filter and receiver bottle for rapid sterilisation of media and buffers. High flow rate with very low protein binding.
Cryogenic Vials, Internal Thread
Silicone-gasket sealed vials rated for the liquid-nitrogen vapour phase, with a self-standing star base and a writing patch that survives the freezer.
Extrusion 3D Bioprinter
Multi-head pneumatic extrusion with independent temperature control per cartridge, so a cell-laden hydrogel and a structural support material can be co-printed in one build.
Digital PCR System
Partitions each reaction into tens of thousands of droplets to deliver absolute quantification without a standard curve — the method of choice for rare-allele and copy-number work.
Benchtop Flow Cytometer
Three-laser, twelve-detector configuration in a benchtop footprint, with fixed alignment optics and automated startup/shutdown that keeps day-to-day CVs tight without a dedicated operator.
Automated Liquid Handling Workstation
Eight-channel head with deck positions for plates, tips, and reagent troughs. Protocol scripting removes the pipetting bottleneck from NGS library prep and high-throughput screening.
Benchtop Research Bioreactor
Glass-vessel bioreactor with cascaded PID control of DO, pH, temperature, and agitation. Runs microbial and mammalian processes with vessel and impeller swaps rather than a second system.
Confocal Laser Scanning Microscope
Point-scanning confocal with spectral detection and a pinhole that rejects out-of-focus light, giving true optical sectioning for thick specimens and live 3D time-lapse.
Sanger Sequencing Service
Single-pass sequencing of plasmids and PCR products with a long high-quality read. Chromatograms and raw .ab1 trace files are returned alongside the base calls.
Gene Synthesis & Codon Optimisation
Sequence-verified synthetic genes delivered in your choice of vector, with codon usage optimised for the expression host to lift yield without altering the protein sequence.
Custom Peptide Synthesis
Solid-phase Fmoc synthesis with a broad modification menu — labels, cyclisation, and unnatural residues. Every peptide is released with HPLC and mass spectrometry data.
Custom Antibody Production
End-to-end polyclonal and monoclonal programmes — antigen design, immunisation, screening, and purification — with titre reporting at every bleed so you can stop or extend the schedule.
NGS & Bioinformatics Service
Library prep through to analysed results. Raw FASTQ files are always returned with the report, so the data remains yours to reanalyse independently.
MALDI-TOF Analysis Service
Accurate mass determination and peptide mass fingerprinting for protein identification, intact mass confirmation, and synthetic compound characterisation.
How buying works
A catalogue you browse, a quote you receive
AG Biotech is a quotation-driven supplier. Nothing on this site carries a price, because the right price depends on pack size, lead time, and volume — and on what you are actually trying to do.
Tell us the requirement
Send a product code, a specification, or a description of the assay. Partial information is fine — we will ask the right questions.
We scope and quote
A specialist confirms the configuration, pack size and lead time, then sends a written quotation — typically within one working day.
Supply and support
Consumables ship. Instruments arrive installed, validated and with your team trained. Support does not end at the invoice.